May 14, 2021 · Use scrap two-by-fours to brace the posts in the post-holes. Plumb each post with the bubble level or laser level. Working down the line of posts, fill each hole with dry quick-set es below ground-level. When all are filled, add fresh water slowly, by hose, on top.array of options for fences to confine and protect livestock. Whether used as permanent, periphery boundaries, temporary pasture dividers or to encircle a house, fences need careful planning and construction for efficient usefulness, long life and low maintece. Several decisions must be made when install-ing fencing.Steps for installing a fence gate: Drive the post hole digger into the ground, separate the handles, and set aside any soil the digger collects. Do this until you have two holes each about 30” deep. If objects like a brick or rock are encountered that the post hole digger can’t remove, an iron digging bar can help loosen the object.The Australasian Wire Industry Association rmends the application of an epoxy mastic paint 100 to 200mm above and below the ground level mark on the post. This will help prevent contact with any moisture or soil build-up at the base of the post. The bottom of the post should be situated 40mm minimum from the bottom of the concrete footer.